ACCESSCARD Elevator controler 48 floor - backup battery - metal case

Description

Introduction

GV elevator is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV-Readers / GV-GF Fingerprint Readers can be connected using RS-485 connection and network connection. The controler can recognize identification cards and grant access to the authorized floors only.

  • Grant access to specific elevator floors using access cards, card's PIN code or fingerprint
  • 48 Floors: Built-in 48 relay outputs to support up to 48 elevator floors
  • Support up to 2 GV-Readers / GV-GF Fingerprint Readers through network connection and RS-485 connection

 


SPECIFICATIONS
System Requirements
GV-ASManager Version GV-ASManager V4.1 or later
Hardware
CPU 32-bit ARM7TDMI
Number of User Cards 40,000 cards
Event Buffer 1,000,000 events and log data
Power AC 100~250 V , 50~60Hz
RS-485 Interface 1 RS-485 interface only for GV-Readers and GV-GF Fingerprint Readers (max. 2 readers)
TCP/IP Interface 1 TCP/IP interface for GeoVision network readers
Communication TCP/IP
Battery Built-in battery
Output GV-EV48-24 Floors 24 relay outputs (30VDC, 1A; 125V AC, 0.3A)
GV-EV48-48 Floors 48 relay outputs (30VDC, 1A; 125V AC, 0.3A)
Operating Temperature 0~65°C / 32 ~ 149°F
Operating Humidity 10% ~ 90% RH (non-condensing)
Dimensions (W x H x D) 210 x 170 x 55 mm (8.27 x 6.69 x 2.17 in)
Weight 610 g (1.34 lb)
Certification CE, FCC, RoHS