DCISPYCAM IP 1.3M WDR 2.0mm low lux 0.01


Image Sensor:  1/3" Progressive Scan CMOS
Min. Illumination:  Color: 0.01lux @(F1.2, AGC ON)
B/W: 0.001lux @(F1.2, AGC ON)
Shutter time:  1s ~ 1/100,000s
Lens:  4mm @ F2.0, angle of view: 73.1 ° (2.0mm, 2.8mm, 6mm, optional)
Lens Mount:  M12
Day& Night:  Electronic
Wide Dynamic Range:  120 dB
Digital noise reduction:  3D DNR
Compression Standard
Video Compression:  H.264 / MPEG4 / MJPEG
Bit Rate:  32 Kbps ~ 16 Mbps
Audio Compression:  G.711/G.726/MP2L2
Triple Streams:  Yes
Max. Image Resolution:  1280x960
Frame Rate:  50Hz: 25fps (1280 × 960), 25fps (1280 × 720)
60Hz: 30fps (1280 × 960), 30fps (1280 × 720)
Third Stream:  50Hz: 25fps (1280 × 960)
60Hz: 30fps (1280 × 960)
Image Settings:  Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser
BLC:  Yes, zone configurable
HLC:  Support
ROI:  Max. 4 ROI areas
Picture Overlay:  128 x 128, BMP 24bit, zone configurable
Network Storage:  NAS
Alarm Trigger:  Intrusion detection, Defocus detection, Motion detection, Face detection, Dynamic analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception
Security:  User Authentication, Watermark, IP address filtering, anonymous access
System Compatibility:  ONVIF, PSIA, CGI, ISAPI
Audio Input:  1-ch 3.5 mm audio interface, MIC IN/LINE IN
Audio Output:  1-ch 3.5mm audio interface (line level, 600 Ω)
Communication Interface:  1 RJ45 10M/100M Ethernet interface/1 RS232
Alarm Input:  1
Alarm Output:  1
Video Input:  1 RJ12 interface
On-board storage:  Built-in Micro SD/SDHC/SDXC card slot, up to 64 GB
Operating Conditions:  -30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
Power Supply:  12 VDC ± 10%, PoE (802.3af)
Power Consumption:  Max. 6.5 W
Dimensions:  78×105×32mm
Weight:  450g
NOTE::  -10: Cylindrical sensor unit
-20: L-shaped sensor unit
* Different brackets included for each sensor unit.