DCIPTZ 2M 30X Bosch IP66 WDR 60W

Description

Imager 1/2.8" type CMOS
Number of Pixels Effective: Approximately 3.27 Mp
Delivered: Approximately 2 Mp
Aspect Ratio HD: 16:9
Lens 30x optical zoom,(4.7 to 94 mm)
Focus One-push (default), Automatic (normal, low), Manual
Iris Automatic with manual override (F1.6 to F3.5)
Field of View 1080p Mode: 2.9° (tele) to 55.4° (wide)
Minimum Working Distance Day Mode: 300 mm (wide) to 1000 mm (tele)
Night Mode: 10 mm (wide) to 1,000 mm (tele)
Gain Control Automatic / Manual (-3 to 28 dB, 2 dB steps / 16 steps)
Digital Zoom 12x
Sensitivity 30 IRE
Day Mode:
SensUp Off (1/30 [1/25] shutter)
High Sensitivity Off: 0.8 lux (0.074 fc)
SensUP On, maximum (0.25 sec shutter)
High Sensitivity On: 0.04 lux (0.004 fc)

Night Mode:
SensUP Off (1/30 [1/25] shutter)
High Sensitivity Off: 0.12 lux (0.011 fc)
SensUP On, maximum (0.25 sec shutter)
High Sensitivity On: 0.005 lux (0.0005 fc)
Electronic Shutter Speed 1/1 to 1/10,000 sec, 22 steps
Wide Dynamic Range 86 dB (WDR On)
Signal to Noise Ratio >50 dB (AGC Off, Weighting On)
Backlight Compensation On / Off
White Balance ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp
Day/Night Monochrome, Color, Auto
Mechanical
Pan Range 360° continuous
Tilt Angle 1° above horizon
Pre-Position Speed Pan: 400°/sec
Tilt: 300°/sec
Modes Turbo Mode (Manual Control):
Pan: 0.1 to 400°/sec
Tilt: 0.1 to 300°/sec
Normal Mode: 0.1 to 120°/sec
Preset Accuracy ±0.1° typical
Electrical
Input Voltage 21 to 30 VAC
50/60 Hz (Class II)
High PoE (with Bosch NPD-6001A Midspan, sold separately)
PoE+ (IEEE 802.3at, class 4 standard)
Power Consumption 60 W / 69 VA (heaters on)
Or 24 W / 44 VA (heaters off)
Surge Suppression
Protection On Alarm Inputs
Peak Current: 17 A
Peak Power 300 W (8/20 μs)

On Alarm Outputs
Peak Current: 2 A
Peak Power: 300 W (8/20 μs)

On Relay Output
Peak Current: 7.3 A
Peak Power: 600 W (10/1000 μs)

On Power Input (Dome)
Peak Current: 7.3 A
Peak Power: 600 W (10/1000 μs)

On Power Output (Arm Power Supply)
Peak Current: 21.4 A
Peak Power: 1500 W (10/1000 μs)
Ethernet 10/100 Ethernet Data Lines