ACCESSCARD Controller with built-in Reader Standalone

Description

Working as a standalone solution, GV is a card reader and also a single door controller. It is possible to add one more card reader to GV for entry and exit applications. GV has the capability to store up to one thousand cards. When GV is being used as a standalone unit, the programming is done from the software GV-ASManager through the RS-485 connection.

GV is suitable not only for any normal door control but also for parking gate and elevator control. GV is an economic solution for access control.

Key Features

  • 1,000 / 40,000 cards (standalone / networked or RS-485 mode)
  • Built-in 2 digital inputs and 1 relay output
  • 1 Wiegand output (26 ~ 64 bits) for extra reader programming
  • 1 door expandable to 2 doors with optional GV-ASBox
  • Built-in tampering alarm
  • Weather-proof and IP66-compliant housing (for outdoor use)
  • Built-in 13.56MHz Reader





Specifications

CPU 32-bit RISC microprocessor
Number of User Cards 1,000 / 40,000 cards (standalone / networked or RS-485 mode)
Frequency of Cards 13.56MHz Mifare Contactless Smart Card Reader, ISO14443A compatible
Event Buffer 65,536 events and log data
Power 100 ~ 240V AC, 50 ~ 60Hz
Wiegand Interface 1 Wiegand interface, 26 ~ 64 bit format
12V DC Power Supply, 200mA
Communication Protocol RS-485
Digital I/O Input 2 inputs, dry contact, NO / NC
Output 1 outputs
Operating Temperature -20 °C ~ 60 °C / -4 °F ~ 140 °F
Operating Humidity 10 ~ 90% RH (non-condensing)
Dimensions (W x H x D) 65.8 x 115.6 x 20.5 mm / 2.6 x 4.6 x 0.8 in
Weight 138 g / 0.3 Ib
Certification IP66, CE, FCC, RoHS
Options
Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.
GV-Battery The battery is an uninterruptible power supply (UPS) device, designed to supply GV-AS Controllers’ power during power failure. For GV-AS100 / 110 / 120, GV-ASBox or GV-ASNet is required to use GV-Battery.
GV-Reader The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel. 125kHz and 13.56MHz GV-Readers are available.
GV-RK1352 GV-RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-R1352 GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-DFR1352 GV-DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-GF Fingerprint Reader The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.
GV-CR420 GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The card reader recognizes identification cards and transmits live view through network connection.
GV-ASBox Only works with GV-AS100 / 110 / 120. The device can add Network function, 1 Wiegand interface, 8 additional inputs and outputs to GV-AS100, GV-AS110 and GV-AS120.
GV-ASNet Only works with GV-AS100 / 110 / 120. This device can add Network function to GV-AS100, GV-AS110 and GV-AS120.
GV-Hub Only works with GV-AS100 / 110 / 120. GV-Hub can convert the standard RS-232 signal of up to 4 controllers to RS-485, allowing the controllers to connect to computers.
GV-COM Only works with GV-AS100 / 110 / 120. GV-COM can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.
GV-Net / IO Card Only works with GV-AS100 / 110 / 120. GV-Net / IO Card can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.
Push Button Switch The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.
GV-IB25 / 65 / 85 Infrared Button The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.
Electric Lock Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV-AS ID Card & GV-AS ID Tag GV-AS ID Cards and GV-AS ID Tags are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and tags are available.